What size is #40 roller chain?
Single-Strand Roller Chain Size Chart
|Chain Size||Pitch (P)||Weight (Per Ft)|
What Is a Number 40 chain?
#40 roller chain is a 1/2″ pitch ANSI B29. 1 industrial duty roller chain that is manufactured with precision components and high-strength carbon steel alloys. #40 roller chain is one of the most common chain sizes used around the world today because of its versatility and productive nature.
How strong is #40 chain?
The working load of the best 40 chain is just over 1,000 lbs so the tensile strength should be around 4,000. The 420 is rated higher and is made for hard jerks more than the industrial type 40 chain.
What do roller chain numbers mean?
The first digit(s) indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch would be a #40 while a #160 sprocket would have teeth spaced 2 inches apart, etc.
What is the difference between 40 and 41 chain?
#40 will be the beefiest chain in this class. This will help with thicker sprockets since there is more room between the side plates. #41 will look just like the #420 chain, but will stand shorter.
What are the five parts of roller chain?
For starters, roller chain consists of 5 basic components: Pin, bushing, roller, pin link plate, and roller link plate. Each of these components are manufactured and assembled to precise tolerances and heat treated to optimize performance with regard to wear resistance, fatigue strength, and tensile strength.
Is 40 and 41 chain the same?
Is 40 41 and 420 chain the same?
#420 will have more strength than the #41 chain because the side plates will be taller. #40 will be the beefiest chain in this class. This will help with thicker sprockets since there is more room between the side plates. #41 will look just like the #420 chain, but will stand shorter.
How big is a 40 1R roller chain?
The 40-1R roller chain is commonly referred to as a 1/2″ pitch chain, which is the pin to pin measurement. No. Of Pitches/Links Per 10 Feet: 240
What makes a nitro 40 roller chain so good?
Nitro high-quality 40 roller chains are built for strength, durability and reliability. Our chains are manufactured from very specific carbon & alloy steel to achieve the highest level of wear & fatigue resistance through precise heat treatment & shot peening.
What are the dimensions of a transmission roller chain?
Please check the type/dimensions/specifications of the part OCM40-1R in the Transmission Roller Chain (Oriental Chain Manufacturing) series. The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .