What is the administrative distance for a static route?
What is the administrative distance for a static route?
1
On Cisco routers, static routes have an administrative distance of 1, making them preferred over routes issued by a dynamic routing protocol. The administrative distance is a value that is always only referenced by the local router itself.
What route has the lowest administrative distance?
The most believable route or the route with the lowest administrative distance is one that is directly connected to a router.
Why would a floating static route be configured with an administrative distance?
Floating static routes are used as backup routes, often to routes learned from dynamic routing protocols. To be a floating static route, the configured route must have a higher administrative distance than the primary route. It uses a single network address to send multiple static routes to one destination address.
What is a characteristic of a static route?
It uses a single network address to send multiple static routes to one destination address. It identifies the gateway IP address to which the router sends all IP packets for which it does not have a learned or static route.
What is the administrative distance for RIP?
120
The router learns RIP routes with an administrative distance of 90, although the default is 120….Default Distance Value Table.
| Route Source | Default Distance Values |
|---|---|
| OSPF | 110 |
| Intermediate System-to-Intermediate System (IS-IS) | 115 |
| Routing Information Protocol (RIP) | 120 |
Which type of static route is created as a backup route?
floating static route
A floating static route is used as a backup route. It has a manually configured administrative distance greater than that of the primary route and therefore would not be in the routing table until the primary route fails.
What is the administrative distance of OSPF?
By default, OSPF has a default administrative distance of 110 and RIP has a default administrative distance of 120. Administrative distance values can, however, usually be adjusted manually by a network administrator.
What is a static distance?
Static routes have a default administrative distance of 1. A router prefers a static route to a dynamic route because the router considers a route with a low number to be the shortest. If you want a dynamic route to override a static route, you can specify an administrative distance for the static route.
What is administrative distance Cisco?
administrative distance. A rating of the trustworthiness of a routing information source set by the router administrator. In Cisco routers, administrative distance is a number between 0 and 255 (the higher the value, the less trustworthy the source).