What are the flat curtain rods called?

What are the flat curtain rods called?

Traverse curtain rods
Traverse curtain rods are used for curtains that open and close with a cord or wand. Two-way traverse rods are most common and allow for curtains to open away from the middle toward both ends.

What is a traverse rod?

What are traverse curtain rods? Traverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.

Do you need middle bracket on curtain rod?

For 1 3/8 Inch Diameter Wood Poles: Two curtain rod brackets are sufficient up to a width of 60 inches (5 feet). For poles over 60 inches, we recommend the third bracket in the center to serve as a center support. Over 96 inches, a third rod bracket is required as a center support; this is mandatory!

What is the difference between a curtain rod and a drapery rod?

Drapery rods and curtain rods are both used to hold up fabric. That is the main idea of the rods. Both are supported with hooks. The hooks for drapery rods are thicker to support the weight while the curtain rods are supported with slightly less.

How do swing arm curtain rods work?

A swing arm curtain rod is a rod that is attached to the wall on one side only. The hardware used to mount it consists of a specialized bracket with a hinge that allows the rod to swing 180 degrees to the left or right, depending on which side of the window you install it on.

What is a swivel sash curtain rod?

Swivel End Sash Rods swivel on one end for easy access to the window during washing or opening. They have a baked enamel finish with rust-resistant brackets.

Can you hang regular curtains on a traverse rod?

Regular curtains will not evenly hang in a traverse rod. But with a few sewing and pinch-pleating, you can turn regular curtains into pinch pleat curtains.

How do I keep my curtain rod from sagging in the middle?

How to Fix a Sagging Curtain Rod

  1. 1 – Move Your Support Brackets.
  2. 2 – Add Additional Support Brackets.
  3. 3 – Insert a Support Rod.
  4. 4 – Use a Lighter Fabric.
  5. 5 – Shorten the Curtain.
  6. 6 – Protect the Curtain with a Barrier.
  7. 7 – Purchase a Heavier Duty Curtain Rod.
  8. 8 – Replace the Support Brackets.

When should you use a double curtain rod?

Although very similar in design to single curtain rods, a double curtain rod allows you to layer more than one drapery panel or curtain for a more enhanced and dramatic look. Most typically, people layer a sheer curtain first and then a regular curtain on top to block out light.

Where to hang curtain rods?

Measure the width of your window frame.

  • Decide whether you want your curtain rod to hang on the window frame or extend past it.
  • Allow about 3 inches on each side of the window.
  • Make a mark about four inches above your window for mounting hardware.
  • you will need to take into account the placement of the grommet.
  • How do you install curtain rod brackets?

    Installing Correctly Measure for the height of the rod. Mark where the brackets will go. Add a mid brace if needed. Drill pilot holes to help start the screws. Screw the brackets to the casing or wall. Check for level. Put the curtains on.

    How far do I extend curtain rods beyond the window?

    When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges. If your windows sit closely together and there is not enough room to hang individual rods side by side, hang one long rod across all the windows on the wall.

    How wide should curtain rods be?

    Use these tricks to make the drapes a standard width and to create the illusion of wider windows: The standard distance from the window casing to the end of the curtain rod (excluding finials) on each side of the window should be four to 10 inches. As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.