What is the admin password for Sky router?
What is the admin password for Sky router?
Depending on which hub you have, these are set by default to: Username: admin. Password: sky or the WiFi password on the back of your hub.
How do I find my Sky router username and password?
Accessing your router settings page 192.168. 0.1
- Make sure you’re connected to your home broadband network.
- Open your browser and type 192.168. 0.1 into your address bar.
- When prompted enter the username: admin and password: sky OR, your WIFI password.
How do I login to my Sky router?
Steps for logging in to your Sky WiFi Router:
- Browse to 192.168.1.1 on your internet browser.
- You will come to a login screen. Enter the username and password from the sticker on the bottom of your Sky WiFi Router.
- If you’ve logged in successfully, you’ll see the web interface home page (as seen below) Related Articles.
How do I access my Sky router settings?
Re: Router settings Check you’re connected to your Sky Broadband, then: In a browser address bar, go to 192.168. 0.1. Enter the default username admin.
How do I reset my Sky router?
Simply unplug the router, wait for about 30 seconds, and then plug back in. You can also press the reboot button on the back of the hub. It’ll take a minute or two for your router to start working again, so don’t panic if you don’t have any success immediately.
Where do I Enter my Sky Hub password?
In a browser address bar, enter 192.168.0.1. Select Wireless. Enter the default username admin. And depending on which hub you have, the password sky or your WiFi password.
What to do if your Sky wifi password is wrong?
If asked for a username and password to enter the username is admin and the password is sky or your wifi password. Go to the wireless tab and scroll down to find WPS2 Password, delete and enter a new password, scroll to the bottom and hit save. Now try and connect to your hub using your new password. Hope this helps. What’s this?
What do the lights on my Sky Hub mean?
Each of our Sky hub have a number of lights to show if everything’s working as it should, there’s a problem or if your hub’s doing something like updating its software. Choose your hub and the lights you see to find out what these mean and anything you might need to do if you have a problem.
Where is the WPS button on my Sky Hub?
PRESS and HOLD the WPS button on the side of your hub for a few seconds. When you release, the WPS button light will be flashing amber Activate WPS on your device.