What is pin 1 of the 74LS04?
What is pin 1 of the 74LS04?
74LS04 Pin Configuration
| Pin Number | Description |
|---|---|
| 1 | 1A-INPUT of GATE 1 |
| 3 | 2A-INPUT of GATE 2 |
| 5 | 3A-INPUT of GATE 3 |
| 9 | 4A-INPUT of GATE 4 |
How many pins does a 74LS04 have?
74LS04 pinout 74LS04 has 14 pins. The input pins of the inverting gates are pin 1, 3, 5, 9. 11 and 13. The six pins are the inputs of gates 1-6, respectively.
What is 74LS04 IC?
74LS04 is a 2 input quadruple 8-bit NOT gate IC. Inverter in logic converters is an electronics device whose basic functions are to invert the incoming logic weather it is HIGH or LOW. They are also known as NOT gates. Inverters are easy to design using NMOS and PMOS transistors.
How many not gates are in a 7404 chip?
6 NOT gates
Each 7404 NOT gate IC has 6 NOT gates arranged as shown in the following figure. 14th pin is the Vcc and the 7th pin is the Ground. The outputs directly interface to CMOS, NMOS and TTL.
What is the function of IC 74LS04?
74LS04 Hex NOT Gate IC. 74LS04 is a 2 input quadruple 8-bit NOT gate IC. Inverter in logic converters is an electronics device whose basic functions are to invert the incoming logic weather it is HIGH or LOW. They are also known as NOT gates.
Is an Inverter a gate?
An Inverter is a Logic Gate that has only one Input, it outputs the opposite Logic State of its Input. The Inverter is also called NOT Gate.
Which Gates Cannot be used as an inverter?
Which of the following gates cannot be used as an inverter? NAND and NOR gares are universal gates. Therefore we can implement any gate by using either NAND or NOR gate. X-NOR gate will acts as an inverter when one of the inputs is low.
What are pins 7 and 14 used for?
For most of the 7400 chips, pin 7 is the ground (GND) connection and pin 14 is the +5V power supply. There are exceptions like the 7490. 2.0V or higher signifies a logical “1”; 0.8V or lower signifies a logical “0”.
What is the Pinout diagram for 74LS04 IC?
In summary, 74LS04 IC is TTL/CMOS based, it makes IC much reliable to works with other microcontroller TTL devices. This a pinout diagram of hex NOT gate 74LS04IC. This table lists 74ls04 NOT gate details of all pins. Pin 1 will be used as the input pin for the first inverter.
How many pages are in the tl074cn datasheet?
1. TL074CN.pdf (15 pages) 2. TL074CN.pdf (6 pages) JFET input single operational amplifiers. Each of circuit. temperature coefficient. Features ■ Wide common-mode ( differential voltage range ■ Low input bias and offset current = 15 nV/ √Hz (typ) ■ Low noise e n ■ Output short-circuit protection ■ High input impedance JFET input stage ■ Low
What are the NOT gate details of 74LS04?
This table lists 74ls04 NOT gate details of all pins. Pin 1 will be used as the input pin for the first inverter. Pin 2 will give the output of the first inverter. Pin 3 will be used as the input for the second inverter. Pin 4 will give the output of the second inverter. Pin 5 will be used as the input for the third inverter.
Why do we need a 74LS04 logic chip?
The gates in this chip provide TTL logic outputs which are a must in some applications. 3. 74LS04 is a low cost chip available in market and so it is used when application cost is low. As mentioned earlier 74LS04 has six INVERTING GATES which can be used individually.