What is a BOP hose?

What is a BOP hose?

Parker Hannifin’s complete line of Blowout Preventer hoses (BOP) is developed to meet the most rigorous demands in exploration and deep drilling. Our high-performance BOP hoses are designed for hydraulic use and certified to withstand fire, high heat and pressures in safety critical applications.

What is R3 hydraulic hose?

SAE 100 R3 textile reinforced hydraulic hose is suitable for delivering petroleum or water-based hydraulic fluids. It is mainly used in low pressure conditions and it is also used in pneumatic applications. It is composed of three parts: tube, reinforcement and cover. The hose is easy to operate as a result.

What are the different types of hydraulic hose fittings?

The three most common types of hose fittings are O-ring, mated angle and threaded.

What do the numbers on hydraulic hose mean?

Simply put, a dash size refers to an I.D. of a hydraulic hose or fitting in 1/16″ increments. For example, -6 hose would indicate a hose with I.D. of 6/16″ – or 3/8″. Hoses are measured by inside diameter, unlike tubes which are measured by outside diameter.

Can you patch a hydraulic hose?

Hydraulic hose repair made simple Our in-field hydraulic hose repair clamps have made hydraulic hose repair as simple as possible, with no removal of the hose from the machine. The clamps can be used on most types of hydraulic hose eliminating the need to have different fittings for different types of hose.

What is the difference between 2 wire and 4 wire hydraulic hose?

Hydraulic hoses are rated for different pressures, temperatures, fluids and/or environments. For example, R2T hose has 2 wire braids and is commonly used for low to medium pressure hydraulic fluid. 4SP hose has 4 wire braids in within the rubber and is capable of higher pressures.

What size is my hydraulic hose?

In the vast majority of common hydraulic hoses, the I.D. measurement is divided into 1/16” increments known as the “dash size.” For example, a hose measuring 3/4” ID will be shown as a “-12” coming from the numerator of the fraction of 3/4″=12/16”. A 1” ID would be 16/16 or a -16, and so on.

What size is number 10 hydraulic hose?

“-1” is 1/16, “-2” is 2/16, and so on. In this case, -6 hose would indicate a hose with an inside diameter of 6/16”, or 3/8″. In another example, a -10 tube would indicate a tube with an outside diameter of 10/16″, or 5/8″.

Can you reuse hydraulic hose fittings?

Repeated assembly and disassembly can distort the threads, so it’s important to thoroughly inspect the threads for damage before reusing one of these fittings. If you answered yes to either of these questions, you should definitely replace the fitting.

Can you reuse hydraulic hose?

This situation is never recommended, not by system designers, nor hose manufacturers, nor by fittings companies. …

What are Blow Out Preventer ( BOP ) hoses used for?

Parker’s complete line of Blow Out Preventer hoses (BOP) is developed to meet the most rigorous demands in exploration and deep drilling. Our high-performance BOP hoses are designed for hydraulic use and certified to withstand fire, high heat and pressures in safety critical applications.

What’s the length of a BOP control hose?

Hose length: up to 90ft. High-molecular polymer external coated type, stainless steel armored type external coated type, outer stainless steel wire external coated type. BOP control hydraulic hoses are made with 1/4″ to 2″ inside diameter and 5000 psi working pressure at ambient temperature.

How long is an API 16D blowout preventer hose?

Specified standard API 16D, blowout preventer hoses are ideally suited for high pressure hydraulic applications for drilling well control equipments, and capable of containing the hose rated working pressure in a flame temperature of 1300°F (700°C) for a 5-minute period. Hose length: up to 90ft.