How do I reset my Allworx admin password?

How do I reset my Allworx admin password?

Your first option is to contact your Allworx dealer. They can call Allworx on your behalf to reset the password. If this is not an option for your company, the second way to bypass the password is to boot to safe mode and factory default the system.

How do I factory reset my Allworx phone?

7.11 Reset the Phone to Its Factory Defaults

1. Select the soft key that corresponds to CONFIG on the screen.
2. Highlight Set Factory Defaults.
3. Press the Select button.
4. Select the YES soft key to restore the factory defaults OR select NO to keep the Configuration as is.
5. Phone automatically reboots.

How do I log into my Allworx phone?

Allworx User and Administration Access

1. Open a Web Browser.
2. Enter the Allworx server’s LAN address into the address field of your browser and hit enter. Example: http://192.168.1.254.
3. When the page loads, Click the Login button.
4. Enter your username and Message Center (voicemail) password.
5. Click Submit.

How do I access the Allworx server?

Allworx uses 192.168. 2.254 as the default IP address of the LAN port. To login to the administrator account for the Allworx system software GUI use a web browser with 192.168. 2.254:8080 as the address.

How do I change my password on my allworx phone?

The password can be reset through the phone menus, or by an Allworx System Administrator.

1. Dial “6” followed by your extension number.
2. Enter your pass code by dialing it on the phone keypad, then press “#.”
3. Press the “4” key to get to the main menu.
4. Select option “1” to reset your voice mail password.

How do I change my name on my allworx phone?

Change an Allworx Users Name

1. Log into your Allworx.
2. Proceed to the User section.
3. Select Modify by the extension of the user you wish to change the name of.
4. Change the Name.
5. Select Save.
6. Proceed to the front page.
7. Select Handsets.
8. Select Modify next to the handset of the user you wish to change the name of.

How do I set up my allworx phone?

1. Plug a network cable into the network port on the bottom of the Allworx phone.
2. Connect the other end of the network cable to an available port on your network.
3. Plug in the power adaptor, if needed.
4. Once the phone boots and fails, press the Config soft key.

How do I forward my Allworx phone to my cell phone?

Press the Intercom button, and then dial the extension of the person you would like to talk to. Dialing 45 + an extension will forward any calls that come into the phone to that extension.

How do I set up my Allworx phone?

How to enter phone administration password allworx technical support?

Re: Phone Administration Password 1 Reboot the phone. 2 As soon as you see the “Configuring Network” on the display, press the RELEASE key 3X. 3 In firmware 7.1.x.x and later, this will abort the boot up process. 4 At this point the phone’s admin password should be 2559679. Enter this and press the check mark (enter) key.

What is the allworx password for remote 9212?

When it is set to the factory defaults, it is allworx spelled out -> 2559679. We went through the same issue when a remote 9212 decided it wanted to factory default itself and none of our passwords worked. We tried all kinds of combinations until we got that information from our rep.

Which is the default IP address for allworx?

Allworx uses 192.168.2.254 as the default IP address of the LAN port. To login to the administrator account for the Allworx system software GUI use a web browser with 192.168.2.254:8080 as the address.

Why is my allworx phone not connecting to LaLa Land?

However – the phone was reset to factory defaults, so the IP it wants to connect to is way off in lala land – and the pass listed on the Voip server is rejected. Any way to Un-Brick this handset?