How do I access my TP-Link wireless access point?

How do I access my TP-Link wireless access point?

Open the web browser and type the IP address of the access point/extender (Default is 192.168. 1.1/192.168. 1.254/192.168. 0.254) into the address bar and then Press Enter.

How do I use an old TP-link router as an access point?

Use an Ethernet cable to connect the main router to your TP-Link N router through their LAN ports (any LAN ports may be used). All other LAN ports on your TP-Link N router will now grant devices Internet access.

How do I disable AP isolation on my TP-Link extender?

Go to Wireless > Advanced Settings page. Locate the AP Isolation section and untick the checkbox to disable the AP Isolation.

How do I put a password on my access point TP Link?

Type the username and password in the login page. The default username and password are both admin in lowercase. Click Management->Access Control->Password on left page, and type the old password and new password. Click Save/Apply to save the settings.

What is AP isolation mode on router?

The AP Isolation is a feature of wireless routers that enables you to create a separate virtual network for each wireless client that is connected to a network name or SSID. When this feature is enabled, all wireless devices in the network will not be able to communicate with each other, preventing unwanted hacking.

Should AP isolation enabled?

Enabling AP Isolate prevents all of your wireless from “talking” to one another. Generally speaking, you should disable AP Isolate from your home network use where you need to share resources. You should enable AP Isolate when you are providing wifi access to devices that you have little or no control over.

Which is TP-Link model has 300Mbps access point?

TP-link TL-WA901ND 300Mbps access point installing & setupDefault ip for this model is 192.168.1.254Place of Gateway put 192.168.1.1In internet protocol vers… TP-link TL-WA901ND 300Mbps access point installing & setupDefault ip for this model is 192.168.1.254Place of Gateway put 192.168.1.1In internet protocol vers…

Which is the IP address for TP-Link tl-wa901nd 300Mbps access point?

TP-link TL-WA901ND 300Mbps access point installing & setup. Default ip for this model is 192.168.1.254. Place of Gateway put 192.168.1.1. In internet protocol version 4 u have to type : 192.168.1.1.

Is the TP-Link logo a registered trademark?

Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders.